Unique Combustion

Also available in models like PO 250(4600-6600 kW), PO 310(3900-8300 kW), PO 400(8500-10500 kW), PO 575(13.2-15.2 MW), PO 660(15.5-18.0 MW).

Other Description:

• The PO Series burner can operate on oil (Class D light oil, Class G HFO) and is available in standard outputs from 3.3MW to 18MW.
• The PO Series burner is commonly used on large industrial steam and hot water boilers.

Also available in Models like GU 20(32 kW), GU 200(200 kW), GU 55(51 kW)

Features:

• Automatic multi-fuel oil burners 
• Six burner sizes ranging from 25 kW to 200 kW 
• Waste oil, gas oil, plant oil, or mixtures 
• Fuel selection by simple adjustment of secondary air and oil temperature 
• Integral oil pre-heat tank 
• primary air atomisation 
• Designed for easy maintenance 
• Reliable and trouble-free 
• All kW ratings are nett CV 
• The GU Series oil burner is designed to use a variety of oils including waste oil as a fuel.
• The burner features air atomisation and an integral oil pre-heater tank to assist the oil atomisation to achieve efficient combustion, and therefore requires a compressed air supply.

• All N series burners are custom-built and designed for easy maintenance. This range is typically suited for high resistance, hot water and steam boilers.  
• This burner series can fire on Class C to G oil and is designed for 2 stage High/Low or fully modulating operation.  
• NOG burners are accompanied with a burner mounting pumping and heating unit to heat the Class G oil for atomisation. The oil temperature is maintained to allow the burner an immediate restart reducing downtime. 

• Quick and easy installation
• Reliable and trouble free operation
• Industry standard components available
• Most components can be easily accessed allowing for easy maintenance.
• Burner mounted control panel available for heavy oil range.

Features:

• Energy saving and compatible with environmental requirements 
• Quiet in operation and designed for easy maintenance 
• Reliable and trouble-free 
• Designed and approved in accordance with the European Standard EN 267 
• Suitable for high resistance boilers 
• Industry standard components easily available 
• Designed for 2 or 3 stage operation 
• Plug-in contact facilitates the installation 
• With hydraulic air or servo motor adjustment 
• Fuel – Light distillate oil Class D  (1.5-5.5 cSt @ 40°C) 
• All kW ratings are nett CV 

Also available in Models like MOL 1650(486-1649 kW),  MOL 200(53-202 kW), MOL 2275(1750-2300 kW), MOL 2540(593-2538 kW), MOL 2800(1750-2750 kW), MOL 3400(2768-3443 kW), MOL 350(95-350 kW), MOL 4100(3453-4132 kW), MOL 540(101-540 kW), MOL 795(166-795 kW).