Unique Combustion

CP-PC-1593E-05
Micro-Flow measures the “make up flow” to hold constant pressure. This translates to the leak flow rate. The Intelligent Gas Leak Sensor (IGLS) operates in the viscous flow regime: Sensors with a full scale as low as 0.5 cc/min.

Azbil Flow meter is highly accuate flow meter, Specially desighned for LPG and PNG Flow measuring, Azbil is wel known Japnees brand.

The Coriolis meter is the most common mass flow meter used in the oil and gas industry. Using motion mechanics, it splits the process fluid into two tubes oscillating in opposite directions. Voltage is generated by vibrations, sine waves are created, and the time delay in motion is proportional to the mass flow rate.

CA2-5100-13 (3) Differential Pressure Flowmeters
The differential pressure flow meter measures the volume flow in gases, liquids and steam. They are particularly used in situations where high pressure, high temperature or a large diameter play a role. They are mainly found in the chemical, oil, gas and power industries.

CP-PC-1590E-07  Compact Digital Mass Flow Controller
his function can be used to average the instantaneous flow rate. This function adjusts any drift caused by installation on a vertical pipe. 
  

CP-PC-1604E-04  Digital Mass Flow Controller
This is the mass flow controller that contributes to the total cost reduction of equipment. Please see CP-PC-1590E for details. 1. Compact design saves space.

CP-PC-9010-007E-02  Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9050-001E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9050-002E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9060-001E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9070-001E-00  Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9080-001E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-9090-001E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-1327E-11  Gas Flow Monitor
A gas flow meter, also known as a gas flow monitor, is a tool that measures gas flow by volume or mass. Used for measuring gas flow in natural gas pipelines, compressed air lines, and manufacturer's gas lines, gas flow monitors can be found in a myriad of industries.

SS2-5190-0100-06 Integral Orifies Assembly for very small flow measurement
An integral orifice flow meter is a device used for measuring the fluid flow rate. It measures the volumetric flow rate and speed of liquid or gas as it flows through a pipe. It is a common instrument in the industrial process control industry.

CP-PC-9000-009E-02A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-1594E-02 Micro Flow Rate Liquid Flowmeter
This model is more compact and lighter than its predecessors.
By using the mounting bracket (including in a package), it can be easily installed on a surface (for horizontal pipe connection).
It can also be installed for vertical pipe connection.
A separate converter (amplifier) is not required.

CA2-MTG100F-06  Electromagnetic FlowmetersThe electromagnetic flowmeter uses Faraday's Law of electromagnetic induction to measure the process flow. When an electrically conductive fluid flows in the pipe, an electrode voltage E is induced between a pair of electrodes placed at right angles to the direction of magnetic field.

SS2-5630-7200-05 Tapless Venturi Flowmeters
Flow measurement devices are used in a wide range of applications to measure the movement of fluid through a system. There are many types of fluid flow measurement gauges and monitors in existence, to accommodate different kinds of fluids as well as the varying process conditions and industrial applications in which they occur.

CA2-MGG200F-11 Electromagnetic Flowmeters
Electromagnetic flow meters detect flow by using Faraday's Law of induction. Inside an electromagnetic flow meter, there is an electromagnetic coil that generates a magnetic field, and electrodes that capture electromotive force(voltage).

CA2-5100-13 Vortex Flowmeters
Vortex flow meters are well suited for a variety of applications across a wide range of industries including oil and gas, refining, chemical and petrochemical, and food and beverage.

CP-PC-1333E-15 Vortex Flowmeters
Vortex flow meters are well suited for a variety of applications across a wide range of industries including oil and gas, refining, chemical and petrochemical, and food and beverage.

SS2-AX2200-0100-02 Vortex Flowmeters
Vortex flow meters are well suited for a variety of applications across a wide range of industries including oil and gas, refining, chemical and petrochemical, and food and beverage.

SS2-VRX100-0100-07 Vortex Flowmeters
Vortex flow meters are well suited for a variety of applications across a wide range of industries including oil and gas, refining, chemical and petrochemical, and food and beverage.

CP-PC-1453E-09 Digital Mass Flow Controller
Our wide range of mass flow controllers are available in thermal and pressure based sensor technologies, analog and digital communication, and metal or elastomer seals.

CP-PC-1409E-03  Vortex Flowmeters
Vortex flow meters are well suited for a variety of applications across a wide range of industries including oil and gas, refining, chemical and petrochemical, and food and beverage.

CP-PC-9130-001E-00 Mass Flow Controller
A mass flow controllers produces repeatable results by automatically adjusting demand when line pressure changes due to other processes happening upstream from your device. The outcome is repeatable results with documented process information.

CP-PC-1280E-09  Gas Mass Flowmeter
A mass flow controller (MFC) is a device used to measure and control the flow of liquids and gases. A mass flow controller is designed and calibrated to control a specific type of liquid or gas at a particular range of flow rates.

CP-PC-1597E-06 Gas Flow Monitor
A gas flow meter, also known as a gas flow monitor, is a tool that measures gas flow by volume or mass. Used for measuring gas flow in natural gas pipelines, compressed air lines, and manufacturer's gas lines, gas flow monitors can be found in a myriad of industries.

SS2-MGR200-0100-00  Integral size electromagnetic flowmeters
These meters are applicable for all conductive liquids, such as water, acids, alkalis, slurries and many others. 

CP-PC-9000-008E-00
CP-PC-9000-008E-00
CP-PC-9000-008E-00
CP-PC-9000-008E-00 .                                                                                                              

A Vanaz gas low pressure regulator is a mechanical gas pressure control device made by Vanaz Engineers, designed to reduce and maintain a steady low outlet pressure from a higher inlet pressure source (like an LPG cylinder or gas line). It ensures safe, reliable delivery of gas at a controlled pressure for appliances or industrial equipment.

⚙️ Key Features

• Pressure reduction: Converts higher inlet gas pressure down to a lower, stable outlet pressure suitable for feeding gas burners, furnaces, stoves, or other gas-using equipment.

• Diaphragm control: Uses a diaphragm and spring mechanism for responsive control and steady regulation even with fluctuating inlet pressure.

• Preset or adjustable: Some models have preset outlet pressures, while others can be adjusted via a spring screw.

• Various gas compatibility: Typically used with LPG, natural gas, nitrogen, CO₂, air and other non-corrosive gases depending on model.

• Safety features (in certain types): Some regulators come with over-pressure cut-off (OPSO), under-pressure cut-off (UPSO) and creep relief valves to ensure safe operation.

📌 Typical Uses

• Residential and commercial gas supply lines (e.g., stoves, cooktops).

• Industrial furnaces, commercial kitchens, restaurants where stable low output pressure is critical.

• Gas distribution networks where pressure must be reduced before delivery to appliances.